Because the screen of iPhone 6 plus has been enlarged to 5.5 inches, the opportunity of breaking it has also been enlarged. If unfortunately you broke your iPhone 6 plus display screen, official repair will price you up to a week exclude the time you make the appointment. So if you're expert enough, replacing the iPhone repalce display 6 plus damaged display your self is a better alternative. Right here we will stroll you through a 5 minutes DIY restore guide for replacing the damaged iPhone 6 plus broken screen.

Cracked the iPhone 6 screen? No fear! Just observe this step-by-step iPhone 6 display alternative guide, it's only a 10 mins work!

Please observe: This course of was executed by our experts who have years of expertise of take apart phones, and we used the half which have already got these small parts pre-assembled. This submit is in no way a reference for these who are expert enough to repair their iPhone 6+, do that at your own risk, etradesupply won't be responsible for any damage happened during the repair process.

Instruments Needed:
Pentalobe Screwdriver
PH00 Philip Screwdriver
A Pair of Tweezers
Suction Cup Device
Case Opening Instrument

Step 1. Shut down your iPhone 6 plus before you do anything else. (Be certain you’ve achieved this before the disassembly begins, or chances are you'll trigger short circuit of the internal components of the telephone which can hurt the motherboard)

Step 2. Undo 2 screws on the bottom with the assistance of the Pentalobe Screwdriver. (We suggest you to use a magnetic pad for putting those screws in case shedding them)

Step 3. Stick the suction cup on the bottom of the phone after which pull out the damaged display screen. (In case your screen has already shattered badly, use transparent adhesive tape to cover the floor of the screen to avoid any further injury)

Step 4. Undo 5 screws holding the metal cover, then take the steel cover out.

Step 5. Disconnect the digitizer flex cable connector, LCD display flex cable connector, front dealing with digicam connector and dwelling button flex cable connector. (If what you get is the iPhone 6 plus digitizer and LCD display screen meeting with dwelling button, frame and entrance dealing with digital camera, then you definately simply need to put the brand new one on)

Step 6. Undo the 3 screws holding the house button retaining bracket then decide it up.

Step 7. Pry up the house button flex cable connector then remove the house button.

Step 8. Undo the three screws that holding the steel cowl on the ear speaker.

Step 9. Take out the retaining bracket, ear speaker and front going through digicam.

Step 10. Undo the 7 screws that locking the LCD metal plate.

Step 11. Pry up the LCD back plate connector.

Step 12. Exchange your broken display with the new one.

Notice: We strongly suggest you to check the function of the brand new iPhone 6 plus digitizer and LCD display screen meeting before you set up it on. If you happen to unfortunately get the defective half, you can ask your provider to alternate for a brand new one.